Taking Anesthesia Where it's Needed.

The Magellan-2200 Model 1

The Magellan-2200 Model 1 is compact, robust and flexible, easy to move and was designed for military field hospitals, general civilian hospitals, office-based anesthesia and surgery centers of every description.

The Magellan-2200 Model 1 is pneumatically powered and may be mounted on a table top or mobile cart.

The Magellan-2200 Model 1 is designed as a simple to operate unit containing all of the modes and necessary components to deliver a basic anesthetic,
including a mechanical ventilator and a single agent vaporizer. All of the safety systems required are employed onboard and easy to utilize.

Physiologic monitoring of the operators choice, may be employed as a separate, but necessary device. In standard use, the Magellan-2200 Model 1 may be used with a variety of face masks, endotracheal/tracheostomy tubes and other approved artificial airways that are a standard in any operating theater.

SPECIFICATIONS   Height 23 inches Depth 23 inches Width 17 inches Weight Free-Standing 45 LBS Fully Enclosed 100 LBS Case Material Military Grade Plastic All other Materials Aluminum, brass and plastic Operating Temperature Range 35 to 110 degrees, F. Gas Supply Sources 02 Main and Cylinders Air and/or Air Compressor Oxygen Concentrator 38-70 psi (50 psi is optimal) 38-70 psi (50 psi is optimal) 3-10 psi Flowmeter Fresh Gas Flow 1 to above 20 lpm (each flowmeter) Oxygen Flush Valve Recessed, self-closing, push button color coded and labeled, provides 45-55 lpm contant. flow while push-button is depressed CO2 Absorber System King Systems KAB-9, (re-fillable) or KAB-1 (pre-filled/disposable) C02 Absorber Canister Capacity 400 grams soda-lime Directional Valves Built-in the CO2 absorber CO2 Absorber Holding Bracket Plastic, secured with knob to main frame of machine. Bag-Ventilator Switch/PRV and Scavenger Outlet Port Hand-operated selector switch and rotating knob for PRV and scavenging outlet. Bellows Latex free, upward inflating, range from 0 to 1.6L Bellows Pressure Relief Pre-set at 60 cmH20 Common Gas Outlet Size indexed, quick connect Tubing Circuit King Systems F-360-61 or any standard anesthesia circle circuit Gas Pressure Hoses DISS/thread indexed, female connectors at both ends Gas Inlet Manifold DISS/thread indexed, male connectors with one-way valves Oxygen and Air Supply Gauges 0-3000 PSI reading color coded and clearly labeled Gas Inlet Manifold Filters Located behind Manifold Air and O2 inlet male connectors. Gas Inlet Pressure Regulators Main Supply Cylinder Safety back up Cylinder 0-3000 PSI reading color coded and clearly labeled DISS/thread indexed for O2 Pin indexed, yoke mounted for "D" and "E" cylinders for 02 Oxygen Supply Alarms   Main and Safety back-up Pneumatically actuated when O2 supply falls below 35 psi O2 Concentrator Pneumatically actuated when O2 supply falls below 1psi Alarm power source 9-volt battery located in body of alarm box Alarm on/off Labeled toggle switch located on body of alarm box. Air and O2 Flowmeters Calibrated and scaled 0-10 LPM color coded. O2 flowmeter has a fluted control knob for easy identification by touch Oxygen Concentrator To power O2 flowmeter only Air Compressor May be used to power ventilator and air flowmeter Oxygen Analyzer/Monitor OM-25-ME (or equivalent) Sensor life expectancy 2 years under normal conditions Oxygen Analyzer Power Source 2 each AA batteries, life expectancy approx. 3000 use hours Auxillary O2 Flow Selector Scaled 0-10 LPM in set increments, used for pre/post anesthesia Vaporizer Penlon SigmaDelta Series, bolt (cage) mounted, temperature compensated, very low maintenance Airway Pressure Gauge Dual scaled in cmH20 and mmHg, located on front panel of ventilator Pressure Gauge Tubing Attached to bag/vent switch arm Mechanical Ventilator Pneumatically powered, time cycled, volume constant, pressure variable Volume Range 0 to 1.6 L Insp. Flow Range 0 to .90 lps Insp. Time Range 0.2 to 3.0 seconds Exp. Time Range 0.2 to 30 seconds Ventilator Gas Power Requirements 40 to 70 psi, 50 psi optimal Use toggle switch to select gas source Waste Gas Scavenger Positive and negative relief valves, 1 L reservoir bag, vacuum control knob Total Machine Gas Leakage @ 30cm H2O @ 80cm H2O 0ML/min 0ML/min Internal System Compliance @ 20cm H2O @ 40cm H2O 1.1ML/cm H2O 1.3ML/cm H2O Internal System Resistance @ 1.0L/sec gas flow @ 0.5L/sec gas flow 4.11cm H2O 1.80cm H2O APL Valve Pressure Drop @ 3.0L/min gas flow @ 30L/min gas flow 0.12cm H2O 1.03cm H2O Storage   Indoor + 160 °F Allow unit to warm to room temp. Indoor Outdoor -30 °F Allow unit to warm to room temp.

Print The Above Information - PDF

Oceanic Medical Products, Inc. Medical Technology … there when you need it. Oceanic Medical Products, Inc. is committed to providing full-service and support to our U.S. Government and all branches of the military. From military bases down the road, to our troops, on the go in places that span the globe, Oceanic Medical Products is bringing medical technology that is there when you need it. Recently, National Stocking Numbers were assigned to several Oceanic Medical products. When ordering, refer to the product description information below for NSN ordering codes. For more information, click here for contact options. NATIONAL STOCKING NUMBERS FOR OCEANIC MEDICAL PRODUCTS   Description NSN   Entire Magellan-2200 Military Anesthesia Machine w/ accessories 6515-01-533-0968 Magellan-2200 Military Anesthesia Machine Case by 6515-01-533-1279 Annual Maintenance Kit 6515-01-533-3323 Resposable Supplies Bundle 6515-01-533-1216 Oxygen Analyzer w/sensor 6515-01-533-1177 Oxygen Analyzer w/sensor 6515-01-533-1177 Oxygen Sensor 6515-01-533-1174 Sevoflurane Vaporizer 6530-01-533-1104 Isoflurane Vaporizer 6530-01-533-1169 Water Trap 6530-01-533-1102 PEEP Valve 6530-01-533-0980 Medical Grade Portable Air Compressor 4310-01-532-9886 Case, Padded for the Air Compressor 4310-01-532-9887 Water Medical Grade Portable Air Compressor and Case for same. 4310-01-532-9881 Manuals, Technical, Operator and Service on Compact Disc. 7610-01-537-5157