The Magellan-2200 Model 2

The Magellan-2200 Model-2 Anesthesia Machine is compact robust and flexible, easy to transport and designed for military forward surgical teams, combat surgical hospitals, general civilian hospitals, outpatient surgical centers, office-based anesthesia, military and civilian veterinary medicine.

The Magellan-2200 Model-2 Anesthesia machine is completely pneumatically powered and is designed to be used with any complete or simple patient monitoring system that the operator prefers to use or has available. Power sources for this machine make it the most unique anesthesia workstation in
the world-electrical inputs from many electrical sources to power the air compressor, oxygen inputs from concentrators, cylinders and wall sources. Use this machine for general hospital needs, disaster control in national emergencies as well as military type needs anywhere, anytime.


The Magellan-2200 may be mounted on its custom-made carrying case, a mobile trolley especially designed for the unit, other mobile carts or on a tabletop as the operator prefers.

SPECIFICATIONS   Height 23 inches Depth 23 inches Width 17 inches Weight Free-Standing 45 LBS Fully Enclosed 130 LBS Case Material Military Grade Plastic All other Materials Aluminum, brass and Plastic, military grade Operating Temperature Range 35 degrees F to 110 degrees F Gas Supply Sources 02 Main and Cylinders Air and/or Air Compressor Oxygen Concentrator 38-70 psi (50 psi is optimal) 38-70 psi (50 psi is optimal) 3 to 10 psi (For O2 Flowmeter only) Flowmeter Fresh Gas Flow 1 to above 20 lpm (each flowmeter) Oxygen Flush Valve Recessed, self-closing, push-button, color coded and labeled, provides 45-55 lpm constant flow, while push-button is depressed; may not be used with O2 concentrator as O2 power source CO2 Absorber System King Systems KAB-9 (re-fillable) or KAB-1 (pre-filled/disposable) C02 Absorber Canister Capacity 400 grams soda-lime Directional Valves Built-in the CO2 absorber CO2 Absorber Holding Bracket Plastic, secured with knob to main frame of machine Bag-Ventilator Switch/PRV and Scavenger Outlet Port Hand-operated selector switch and rotating knob for PRV and scavenging outlet Bellows Latex free, upward inflating, range from 0 to 1.6L Bellows Pressure Relief Pre-set at 60 cmH20 Common Gas Outlet Quick-connect, size indexed Tubing Circuit King Systems F-360-61 or any standard anesthesia circle circuit Gas Pressure Hoses DISS and thread indexed, female connectors at both ends Gas Inlet Manifold DISS and thread indexed,male connectors with one-way valves Oxygen and Air Supply Gauges 0-3000 PSI reading color coded and clearly labeled Gas Inlet Manifold Filters Located behind Manifold Air and O2 inlet male connectors Gas Inlet Pressure Regulators Main Supply Cylinder Safety back up Cylinder DISS/thread indexed for O2 Pin-indexed, yoke mounted for "D" and "E" cylinders for O2 Oxygen Supply Alarms   Main and Safety back-up 0-3000 psi range, color coded and clearly labeled Alarm power source 9-volt battery located in body of alarm box Alarm on/off Labeled toggle switch located on body of alarm box Air and O2 Flowmeters Calibrated and scaled 0-10 lpm, color coded, O2 flowmeter has a fluted control knob for easy identification by touch, alone Oxygen Concentrator To power O2 flowmeter only Air Compressor May be used to power ventilator and air flowmeter Oxygen Analyzer/Monitor OM-25-ME (or equivalent) Galvanic cell sensor, life expectancy 2 years under normal conditions Oxygen Analyzer Power Source 2 each AA batteries, life expectancy approx. 3000 use hours Auxillary O2 Flow Selector Scaled 0-10 LPM in set increments, used for pre/post anesthesia Vaporizer Penlon SigmaDelta Series, bolt (cage) mounted, temperature compensated, very low maintenance Airway Pressure Gauge Dual scaled in cmH2O and mmHg, located on front panel of ventilator Pressure Gauge Tubing May be attached to bag/vent switch arm or to a point within the patient breathing circuit (operators choice). Mechanical Ventilator Pneumatically powered, time cycled, volume constant, flow variable Volume Range 6 to 14 L Insp. Flow Range 10 to 40 L/min Frequency breaths per minute 10 to 30 Exp. Ratio Fixed 1:1.8 nominal Ventilator Gas Power Requirements 40 to 70 psi, 50 psi optimal Waste Gas Scavenger Positive and negative relief valves, 1 L reservoir bag, vacuum control knob Total Machine Gas Leakage @ 30cm H2O @ 80cm H2O -0-ml/Min -0-ml/min Internal System Compliance @ 20cm H2O @ 40cm H2O 1.1ML/cm H2O 1.3ML/cm H2O Internal System Resistance @ 1.0L/sec gas flow @ 0.5L/sec gas flow 4.11cm H2O 1.80cm H2O APL Valve Pressure Drop @ 3.0L/min gas flow @ 30L/min gas flow 0.12cm H2O 1.03cm H2O Storage   Indoor + 160 °F Allow unit to warm to normal Indoor Outdoor -30 °F OR temp for 1hour

Print The Above Information - PDF

Oceanic Medical Products, Inc. Medical Technology … there when you need it. Oceanic Medical Products, Inc. is committed to providing full-service and support to our U.S. Government and all branches of the military. From military bases down the road, to our troops, on the go in places that span the globe, Oceanic Medical Products is bringing medical technology that is there when you need it. Recently, National Stocking Numbers were assigned to several Oceanic Medical products. When ordering, refer to the product description information below for NSN ordering codes. For more information, click here for contact options. NATIONAL STOCKING NUMBERS FOR OCEANIC MEDICAL PRODUCTS   Description NSN   Entire Magellan-2200 Military Anesthesia Machine w/ accessories 6515-01-533-0968 Magellan-2200 Military Anesthesia Machine Case by 6515-01-533-1279 Annual Maintenance Kit 6515-01-533-3323 Resposable Supplies Bundle 6515-01-533-1216 Oxygen Analyzer w/sensor 6515-01-533-1177 Oxygen Analyzer w/sensor 6515-01-533-1177 Oxygen Sensor 6515-01-533-1174 Sevoflurane Vaporizer 6530-01-533-1104 Isoflurane Vaporizer 6530-01-533-1169 Water Trap 6530-01-533-1102 PEEP Valve 6530-01-533-0980 Medical Grade Portable Air Compressor 4310-01-532-9886 Case, Padded for the Air Compressor 4310-01-532-9887 Water Medical Grade Portable Air Compressor and Case for same. 4310-01-532-9881 Manuals, Technical, Operator and Service on Compact Disc. 7610-01-537-5157